-
ARC S1HB, High Build, Single Coat, Edge-Retentive Barrier Coating
A 100% solids, mineral-reinforced, high-build coating to protect structures against chemical corrosion and erosion.
ARC S1HB is designed to:
- Provide excellent barrier protection against corrosion and chemical attack
- Provide resistance to erosive flow
- High build (1 – 2 mm/ 40 – 80 mils) coating designed for rough surfaces
- Easily applied by heated plural component spray with brush application for touch-up
- UV sensitive pigment for QC inspection
Product Availability: North America, Latin America, and Asia Pacific
-
ARC S1PW HB, General Purpose, Sprayable, Corrosion Protection Coating
100% solids, high build coating to protect structures against chemical, erosion and corrosion attack. ARC S1PW HB is certified for cold water service requiring NSF 600 compliance and NSF 61 certification.
ARC S1PW HB is designed to:
- Provide excellent barrier protection against erosion, corrosion, and chemical attack
- Meet all requirements of NSF 61 for potable, cold water service
- Easily apply by plural component spray
-
ARC S1PW, Brush-Roll-Spray Applied Moderate Chemical Resistant Coating
100% solids, reinforced thin film coating to protect structures against erosion, corrosion, and chemical attack.
ARC S1PW details:
- Provide excellent barrier protection against abrasion, corrosion and chemical attack
- Extends wear and predictable maintenance
- NSF 600 Compliant
- NSF 61 certified as a protective barrier layer for the internals of tanks, pumps, valves and fittings where potable water exposure exists and NSF certification is required
- NSF 61 for use on the internals of pipes with a diameter of 1/2 inches or greater
- NSF 61 for use on the internals of tanks >=1,500 US gal (5678 Litres)
-
ARC S2, Brush-Roll-Spray Grade, Ceramic-Reinforced Erosion Resistant Coating
100% solids, ceramic reinforced thin film coating to protect structures against erosion, abrasion, and corrosion. ARC S2 industrial coating is designed to:
- Protect against corrosion and erosion
- Provide improved material flow properties
- Easily apply by brush, roller, airless, or heated plural component airless spraying
ARC S2(E) available from European Warehouse only.
-
ARC S3, FDA Compliant, Thin Film, Corrosion Resistant Barrier Coating
ARC S3 is suited for corrosive applications including those where direct food contact exposures is a requirement. This ceramic reinforced, 100% solids coating is tough enough to perform in both static and erosive flow conditions and complies with 21 CFR 175.300 for direct food contact exposures.
- Provides excellent barrier protection against erosion, corrosion, and chemical attack
- Easily applied by brush, roller, or spray
- Suited for direct food contact exposures
-
ARC S4+, Brush-Roll-Spray Applied, Severe Chemical-Resistant Coating
100% solids, advanced reinforced thin film coating to protect structures against extreme chemical attack. ARC S4+ industrial coating is designed to:
- Protect against extreme chemical attack in immersion
- Provide extended wear resistance
- Apply by brush, roller, airless, or plural component spraying
-
ARC S5, Corrosion Protection in High-Temperature Immersion
Sprayable coating for high-temperature immersion up to 180˚C (356˚F). Ideal for elevated temperature process vessels, and equipment exposed to heated fluids where high-temperature differentials may exist. Protects and upgrades new and old metal equipment.
- Performs in immersed aqueous solution conditions up to 180°C (356°F)
- Replaces exotic alloys, engineered plastics, ceramics and conventional coatings
- Is easily applied by roller, brush, squeegee, or airless spray
-
ARC S7 AR, High Temperature, Chemical and Erosion Resistant Novolac Vinyl Ester Coating
ARC S7 AR is a novolac vinyl ester based, ceramic reinforced, protective coating for high temperature, chemical exposures where erosive particulates and thermal cycling conditions may be present. ARC S7 AR industrial coating is designed to:
- Resists erosion
- Resists thermal cycling conditions up to 180°C (350°F)
- Resists a wide range of inorganic as well as organic acids and hydrocarbon based chemical compounds
- Easily applied by airless spray system
Product Availability: North America
NOTE: For lower temperature, non-corrosive applications such as clean gas, see ARC S7.
-
ARC S7, High Temperature and Chemical Resistant Novolac Vinyl Ester Coating
A low VOC, novolac vinyl ester based, sprayable protective barrier coating for high temperature, chemical exposures where thermal cycling conditions may be present. ARC S7 industrial coating is designed to:
- Resist thermal cycling conditions up to 180°C (350°F)
- Resist a wide range of inorganic as well as organic acids and hydrocarbon based chemical compounds
- Easily apply by airless spray system
ARC Product Datasheet: S7 (English)
FREE E-BOOK: Using Protective Coatings to Reduce Energy Demands in FGD Systems
-
ARC SD4i, Sprayable, Ceramic-Reinforced Coating
100% solids, advanced reinforced thin film coating to protect structures and equipment in extreme immersion services. ARC SD4i industrial coating is designed to:
- Protect against corrosion and erosion
- Provide extended protection in aggressive chemical immersion services
- Apply by brush, roller, airless or plural component spraying
Product Datasheet – ARC SD4i (English)
Webinar: Preventing Corrosion in Your Power Plant – Watch It Now
-
ARC SL-E, 100% Solids, Low Viscosity Amido Amine Cured Epoxy, Ideal for Coating Floors and Aisles
ARC SL-E is a 100% solids, amido amine cured epoxy sealer/traffic coat. It has been formulated so that it can be modified, by the addition of silica flour, for use as a self-leveling epoxy floor topping or, by broadcasting into with a blended aggregate, as a slip resistant surface. When cured SL-E provides durable floor protection with high visibility and ease of maintenance and cleaning.
ARC SL-E thin film industrial coating is designed to:
- Protect new and old concrete subject to mild chemical and/or physical damage
- Replace tiles, outlast paints and other concrete coatings
- Apply by roller, brush, or squeegee
Not available in EMEA.
-
ARC T7 AR, Abrasion Resistant Barrier Coating for High Temperature and Chemical Exposures
A ceramic reinforced novolac vinyl ester, protective coating for high temperature, chemical exposures where aggressive abrasive conditions may be present.
ARC T7 AR industrial coating is designed to:
- Resist a wide range of inorganic, as well as organic, acids and hydrocarbon-based chemical compounds
- Resist abrasion
- Easily apply by trowel
ARC Product Datasheet: T7 AR (English)
Click here to view the ARC T7 AR microsite featuring video presentations.
800-758-4788 |CONTACT US
Products
© Copyright 2016. All Rights Reserved.