Positive Displacement Pumps
-
SP1000 / Sealed Pin Joint Pump
The SP1000 series is an efficient, easy to maintain and versatile pump line ideal for highly viscous progress cavity applications.
Features
- Sealed pin joint design for extended life
- Easy maintenance & low ownership cost
- Self-priming minimizes air or vapor lock
- Multiple flange & port configuration options
- Highly volumetric and mechanically efficient
- No pistons, valves or timing gears to wear our or clog up
- Smooth, continuous, non-pulsating flow for accurate metered control
- Outstanding handling of abrasive materials
Applications
Paper Stock, Coating, Starch, Crude Oil, Lubricants, Soaps, Detergents, Paint, Polymer Transfer, Wastewater Treatment, Drilling Muds, Oil/Water Separations, Lime Slurries, Sampling, Polymer Metering, Pastes, Gels, Clay, Adhesives, Mastics, Mortar and Grout.
Optional Features
- Variety of drivers and mounting configurations
- Packing or mechanical seals
-
SPPC Gear Joint / Sealed Gear Joint Pump
Features
- Sealed Gear Universal Joint
- Exceptional Abrasion Resistance
- Modular Design
- Ability to Rotate the Suction Housing
- Simple Design: Minimal Parts
Applications
- Municipal Sludge
- Raw Sewage
- Adhesives
- Starch
- Crude Oil
- Plaster
- Resins
- Hazardous Wastes
- Paint
Optional Features
- Water Flush Packing
- Deflector near Rotor Head
- Shaft Sleeves
- Large Selection of Drive Ends
Disassembly of Summit Pump’s PC Gear Joint Pump
Cutaway of Summit Pump’s PC Gear Joint Pump
-
SPPC SPL Pin Joint / Pin Driven Pump
Features
- Open Pin Joint
- Designed for Easy Maintenance
- Non-Pulsating Flow
- Low Vibration
- High Efficiency
- Viscosites Exceeding 1 Million Centipoise
Applications
Grout, Asphalt, Lubricants, Pulp & Paper, Crude Oil, Soaps & Detergents, Clays, Drilling Muds
Optional Features
- Water Flush Packing
- Large Selection of Drive End Options
-
SPPC Wobble / SWP & SWPM
Features
- Multiple Material Options
- Simple and Compact
- High Solids Pumping Ability
- Self-Priming: Suction Lifts to 26 Feet
- Smooth Continuous Operation
- Quiet Operation
- Rotors & stators SWP15, SWP22, SWP33 & SWP44 are interchangeable, along with SWPM rotors & stators
Applications
Water, Abrasives, Waster & Water Treatment, Oils and Lubricants, Polymers, Bilge Pump, Mobile Friendly Applications, Chemical Slurries, Irrigation, Limestone Slurries, Paint
-
VV40 / Internal Gear Pump
Features
- High Viscosity Fluid Capabilities
- High Abrasives Handling Ability
- Capacities to 470 GPM
- Pressures to 200 PSI
- Temperatures -60°F to 800°F
- External End Clearance Adjustment
- Self-Priming
- Available Packed or Mechanically sealed
- Interchangeable Parts between Specific Sizes
Applications
Water, Chemical, Oil, High Abrasive, Paint, Pulp and Paper, Resins/Adhesives
Optional Features
- Available without Safety Relief Valve
- Multiple Sealing Options
- Packed
- Component Mechanical Seal
- Cartridge Mechanical Seal
- Adaptability for Different Configurations
Disassembly of Summit Pump’s VV40LL Model
Cutaway of Summit Pump’s VV40LL Model
-
VV75 / Internal Gear Pump
Features
- Compact Design is Simple to Mount
- Reduces Extensive Alignment Time
- Minimal Moving Parts
- High Viscosity Fluid Capabilities
- High Abrasives Handling Ability
- Capacities to 30 GPM
- Pressures to 100 PSI
- Temperatures -60°F to 225°F
- Self-Priming
- Available with lip or mechanical seal
- Interchangeable Parts between Specific Sizes
Applications
Water, Chemical, Oil, High Abrasive, Paint, Pulp and Paper, Resins/Adhesives
Optional Features
- Adjustable Safety Valve Settings (50 PSI standard)
- Available without Safety Relief Valve
- Multiple Sealing Options
- Lip Seal
- Component Mechanical Seal
- Adaptability for Different Configurations
-
VV95 / Internal Gear Pump
Features
- High Viscosity Fluid Capabilities
- Ability to Operate at Higher Speeds
- Capacities to 115 GPM
- Pressures to 250 PSI
- Temperatures -40°F to 350°F
- External End Clearance Adjustment
- Self-Priming
- Mechanically sealed Behind Rotor, Isolating Bearings from Fluid
- Interchangeable Parts between Specific Sizes
- 180 Degree NPT Suction and Discharge Ports
- Integrated Gauge Ports
Applications
Water, Chemical, Oil & Fuel, High Abrasive, Paint, Pulp and Paper, Resins/Adhesives
Optional Features
- Available with or without Safety Relief Valve
- Adaptability for Different Configurations
