-
Gardner Denver GD150 Blower
Gardner Denver GD150 Blower:
Sold complete with 30psi Relief Valve, Port Flanges, Brass Check Valve, Air Filter, and Mounting Feet
- Lightweight and compact
- Oil-free discharge
- Replaces Drum J150 and J102
- For general purpose liquid tankers e.g. liquid foodstuff, solvents, acids, alkalis, hot bitumen, resins and other chemicals
- Compact, stainless steel rotor, anodised aluminium body and sideplates, air cooled, oil free vane design
- Low viscosity liquid discharge from multi-purpose tank-trucks and other tank containters
- Highly corrosion resistant
Maximum flow:117m3/hr (69 cfm) at 2.5 bar g (36 psig)
Maximum pressure: 2.5 bar g (36 psig)Maximum RPM:1600
-
Heavy Duty Industrial Air Clutches
CK Clutches Sizes 8.5-10-12-14
Factors Served: Factory Automation, Forestry, Materials Handling, Metals and Printing and Die Cutting
MODEL CK – Used in applications as a coupling clutch, the model CK features a compact design and an ability to provide high torque instantaneously or give soft start capabilities to high inertia loads. The model CK is equipped with a pressure plate, torque assembly, backplate, keyed hub and keyed backplate hub for coupling both shafts.
MODEL CR – Designed for installation in a power transmission system where available mounting surfaces of items to which the clutch is to be fastened (IE., sheaves, sprocket, flywheel, gear) have a diameter smaller than the bolt circle of the pressure plate, The model CR has a pressure plate, hub, torque assembly and a registered backplate with a bolt pattern for a mounting surface, The finned pressure plate and backplate allow the model CR clutch greater heat dissipation capabilities.
MODEL CW – Consisting of a pressure plate, hub and torque assembly, the model CW is designed for mounting on any suitable flat surface on either the drive or driven side of the power transmission system where the flat surface is large enough to accommodate the bolt circle of the pressure plate, The compact size of the CW permits installation in areas that might not be considered suitable for other types of clutches.
MODEL PM (Pilot Mount) – Carlson pilot mount clutches are available in sizes from 8.5 to 25 inches in diameter. The model PM is a self-contained, bearing mounted clutch designed for mounting on the end of a shaft. This model consists of a finned pressure plate, torque assembly, adapter shaft that is bored to fit the customer’s shaft and a bearing mounted pilot backplate for mounting a sheave, sprocket, gear, etc.
Heavy Duty Industrial Air Clutches
- Two friction surfaces
- Greater torque capacity
- Low inertia design
- High temperature air diaphragm
- Quick engagement and disengagement
- Easy adjustment for lining wear
The Carlson Heavy Duty Industrial Air Clutches
-
Moyno POWERFLOW Progressing Cavity Parts
Powerflo Products, Inc. provides replacement parts engineered to fit Moyno POWERFLO Progressing Cavity pumps. Please contact us for replacement parts, pumps and engineered new pump units.
Moyno POWERFLO Progressing Cavity Model:
- 1L3-CDD, 2L3-CDD, 3L3-CDD, 1L4-CDD, 2L4-CDD, 3L4-CDD, 1L6-CDD, 2L6-CDD, 3L6-CDD, 1L8-CDD, 2L8-CDD, 3L8-CDD, 1L10-CDD, 2L10-CDD, 3L10-CDD, 1L10H-CDD, 2L10H-CDD, 3L10H-CDD, 1L12-CDD-2L12-CDD, 3L12-CDD, 1L12H-CDD, 2L12H-CDD, 3L12H-CDD
- L3-CD, L4-CD, L6-CD, L8-CD, L10-CD, L10H-CD, L12-CD, L12H-CD
-
MTH Pumps California Distributor
Powerflo Products Inc. is a proud distributor of MTH pumps. MTH Pumps is a highly vertically integrated regenerative turbine, centrifugal, sealless, and OEM pump manufacturer who sells its products through representatives, distributors or directly to large volume OEM’s. The company is a closely held family owned business that has grown consistently over the years since its inception in 1965. One key to its growth has been its ability to determine the cause of customer pumping problems and solve the problems with custom engineered solutions. MTH pumps are produced in a modern U.S. manufacturing plant in Plano, Illinois, utilizing state-of-the-art computer controlled machining equipment to provide consistently reliable products. 100% of our products are tested before leaving the factory to assure quality.
Please contact our team at Powerflo for assistance with existing pumps and new application. As the authorized Versamatic distributor and repair facility we can provide an efficient solution for your pump and process needs. We’re excited to help!
-
Myers C Series Pumps
Heavy-duty piston pump with high-strength fluid end and spring-loaded flat valves for economical high-pressure pumping of large volumes of fluid. Crankshaft can be rotated in either direction making installation easier.
C Series Pump Features:
- Flows to 40 GPM
- Pressure ratings to 2,500 PSI
- High-strength fluid end with spring-loaded flat valves for consistent high pressure pumping
- Easily serviced in field without removal of pump
Models: C25-25, C35-20, C40-20
-
Myers CPM Series Pumps
Superior equipment technology allows the versatility to machine the pump end from a selection of standard or optional materials. Removable cover section for easy service and is available with hydraulic drive adaption.
CPM Series Pump Features:
- Flows to 18 GPM
- Pressure ratings up to 4,000 PSI
- Crankshaft rotates in either direction
- Continuous splash lubrication provided
- Cast Iron crankcase serves as oil reservoir
Models: CPM18-40, CPM24-30
-
Myers CX Series Pumps
Rugged design for continuous operation. Three suction ports for installation versatility. Smooth solid ceramic cylinder liners allow continuous operation at maximum pressure and flow. Large concentric suction and discharge valves allow complete filling of cylinders. Solid cast iron power end with constant lubrication of all working parts. Fluid end available in high-strength cast iron, aluminum-bronze, or 316 stainless steel.
BX Pump Features:
- Flows to 20 GPM
- Pressure ratings to 1,500 PSI
- Constant lubrication of all power end parts
- Spring loaded chevron style packing
Models: CX10-15, CX20-10
-
Myers CXP Series Pumps
These pumps offer seven interchangeable plunger and seal packages, allowing complete hydraulic coverage. Optimum flow and pressure is easily converted, even in the field by changing the plunger and seal kit. Cylinder body of high-strength ductile iron or aluminum-bronze for salt-water applications.
CXP Series Pump Features:
- Flows to 30 GPM
- Pressure ratings to 3,500 PSI
- Continuous splash lubrication provided either direction of rotation
- Offerings of seven interchangeable plunger and seal packages
- Easily serviced in field without removal of pump
Models: CXP5-35, CXP7-30, CXP14-24, CXP18-20, CXP22-16, CXP26-14, CXP30-12
-
Myers D Series Pumps
Slow operating speed reduces wear and prolongs pump life. The fluid end is available in ductile iron or aluminum bronze with flat valves, making routine maintenance easy without removing the pump from the system. All the valve and piston assemblies are serviceable through convenient front and top openings.
D Series Pump Features:
- Flows to 65 GPM
- Pressure ratings up to 2,000 PSI
- Internal gear reductions
- Continuous splash lubrication provided either direction of rotation
Models: D35-8PP, D35-12, D50-12, D60-10, D65-16, D65-20
-
Myers DP Series Pumps
Myers largest high volume/pressure series offers interchangeable plungers, seals, and fluid ends to provide various flow/pressure ratings. Also available in hydraulic drive configuration.
DP Series Pump Features:
- Flows to 120 GPM
- Pressure ratings up to 5,500
- Internal gear reductions of 3.95:1
- Super hard, non-scoring plungers
- Suction and discharge located for easy service
- Offerings of seven interchangeable
plunger and seal packages
Models: DP28-55, DP55-28, DP70-22, DP80-20, DP90-18, DP120-12
-
Myers E Series Pumps
Gearcase of rugged cast iron protects the gears and serves as oil reservoir for
continuous splash lubrication. Pinion and gear are helical cut and machined from high-strength alloy steel, and can rotate in either direction. Valves are abrasion resistant for dependable service in the harshest environments.E-Series Pump Features:
- Flows to 110 GPM
- Pressure ratings up to 3,000
- Easily serviced in field without removal
of pump - Abrasion resistant valve assemblies
- Internal gear reductions of 3.95 to 1
Models: E54-30, E70-23, E80-20, E110-14
-
Myers Model HPL120-30 Pump
The HPL Series brings you the latest in sewer jet pump technology from your time-tested partner, Myers. The HPL keeps your truck running with industry-leading serviceability, a breakthrough in jetting. New cartridge valves, an open cradle for packing and plunger maintenance, and an external lube filter minimize maintenance time, keeping your equipment on the job making you money.
HPL20-30 Pump Features:
- True 120 GPM at 3,000 PSI
- True Continuous Duty
- Quiet Operation
- True 120 GPM at 3,000 PSI
800-758-4788 |CONTACT US
Product Tag - RFQ Only
© Copyright 2016. All Rights Reserved.