CK Clutches Sizes 8.5-10-12-14
Factors Served: Factory Automation, Forestry, Materials Handling, Metals and Printing and Die Cutting
MODEL CK – Used in applications as a coupling clutch, the model CK features a compact design and an ability to provide high torque instantaneously or give soft start capabilities to high inertia loads. The model CK is equipped with a pressure plate, torque assembly, backplate, keyed hub and keyed backplate hub for coupling both shafts.
MODEL CR – Designed for installation in a power transmission system where available mounting surfaces of items to which the clutch is to be fastened (IE., sheaves, sprocket, flywheel, gear) have a diameter smaller than the bolt circle of the pressure plate, The model CR has a pressure plate, hub, torque assembly and a registered backplate with a bolt pattern for a mounting surface, The finned pressure plate and backplate allow the model CR clutch greater heat dissipation capabilities.
MODEL CW – Consisting of a pressure plate, hub and torque assembly, the model CW is designed for mounting on any suitable flat surface on either the drive or driven side of the power transmission system where the flat surface is large enough to accommodate the bolt circle of the pressure plate, The compact size of the CW permits installation in areas that might not be considered suitable for other types of clutches.
MODEL PM (Pilot Mount) – Carlson pilot mount clutches are available in sizes from 8.5 to 25 inches in diameter. The model PM is a self-contained, bearing mounted clutch designed for mounting on the end of a shaft. This model consists of a finned pressure plate, torque assembly, adapter shaft that is bored to fit the customer’s shaft and a bearing mounted pilot backplate for mounting a sheave, sprocket, gear, etc.
Heavy Duty Industrial Air Clutches
We specialize in fluid handling solutions, including pumps, motors, mechanical seals, packing, protective coatings, lubrication and related components.
Our team can help you identify the best solution based on your requirements such as flow rate, pressure, material compatibility, and operating conditions. Simply reach out with your details, and we’ll guide you through the selection process.
Yes, we provide customized and engineered systems to meet unique operational needs. Whether it’s a modification to an existing product or a fully tailored solution, we work closely with you to ensure optimal performance.
We aim to respond within the hour during normal business hours.
We are located at: 5573 Market Place, Cypress, CA 90630
Phone: (714) 761-1591
Many of our orders are for customized assemblies or specialty items. If you do not find what you are looking for in our online products selection, be sure to contact us for more direct assistance.
